213.805.022
27
Date: 2022-09-19
Load mounted safely
Inspection
powerCON TRUE1
Inspection
On-site service
On-site service and maintenance can be provided by the Wahlberg Motion Design, giving owners
access to Wahlberg Motion
expertise and product knowledge in a partnership that will
ensure the highest level of performance throughout the
Wahlberg Motion Design for details.
Life of the lifting cable
It is Wahlberg policy to apply the strictest possible calibration procedures and use the best quality
materials available to ensure optimum performance and the longest possible component
lifetimes. However, lifting cables are subject to wear and tear over the life of the product,
resulting in special attention to the state of the lifting cable. The extent of wear and tear depends
heavily on operating conditions and environment, so it is impossible to specify precisely whether
and to what extent the lifting cable performance will be affected.
The expected lifetime of the lifting cable depends on the load and travel length as well as duty
cycle (refer to
Table 5
).
Table 5 - Expected lifting cable life time at 0° angle
Load
Max. expected number of cycles (up and down)
2.5 kg
250,000
5.0 kg
100,000
10 kg
5,000
The lifting cable should be inspected long before these numbers are reached and checked for
damages, and replaced if necessary
Figure 1: Illustration of the Winch 10 cable mounted in different angles
Summary of Contents for Winch 10 Cable
