WAHLAP TECH LUMBER JACK, Owner'S Manual

Page: 42 / 101

$[HHOHFWURPDJQHWFKDQJH
1.Open the front maintenance door with the key and unplug one connecting terminal,
then remove two screws and the axe electromagnet JF-S1670DL 12V.
2.Install it again in reverse order after changing into new axe electromagnet and make
sure that all screws are coated with the screw glue.
)URQWVOLGHUHOHFWURPDJQHWFKDQJH
1.Repeat 5.2.8 operation and remove the cover; remove six screws with the screwdriver,
then remove the hardware and the Acryl.
2.Push the woodcutter to the middle position of the hillside platform and uplift the hillside
assembly, then pull up the hardware bracket to fix it.
3.Remove one nut, four screws with the screwdriver and unplug one connecting terminal,
then remove front slider electromagnet JF1040B 12V.
4.Replace new and install it in reverse order.
JF1040B 12V JF1040B 12V
JF -S1670DL 12V JF-S1670DL 12V