WAHLAP TECH LUMBER JACK, Owner'S Manual

Page: 23 / 101

1.Turn on the power of the machine, at the same time, press key continuously to
enter into the photoelectric test, at this time, “Please pull the axe for test” occurs on
the LCD screen, at the same time, the red axe lamp flashes quickly.
2.Pull the axe, eject the woodcutter, if the area where the woodcutter passes is
detected to be effective, the blue lamp will be ON, otherwise, the blue lamp will be
OFF.
3.Press key to restart the test, after the test finishes, press key to quit the test.
8VKDSHGSKRWRHOHFWULFXQLWWHVW