WAHLAP TECH LUMBER JACK, Owner'S Manual

Page: 36 / 101

&RQVROHERUGHULQJ5*%/('FKDQJH
1.Open the lower rear maintenance door with the key and unplug one connecting
terminal.
2.Unplug one upper left connecting terminal and one upper right connecting terminal.
3.Remove fourteen screws with the screwdriver and loosen the console Acryl.
4.Cut off the soft light bar fixing glue before the console with the knife.
5.Draw out one left soft light bar and one right soft light bar slowly from the lower rear
maintenance door.Replace new and install it in reverse order.
Note: The tail of the two light strips
should not touch. Note: The tail of the two light strips
should not touch.