WAHLAP TECH LUMBER JACK, Owner'S Manual

Page: 34 / 101

1.Open the upper rear maintenance door with the key and unplug one connecting
terminal.
2.Remove three screws with the screwdriver, then remove LOGO LED box assembly.
3.Remove six nuts with the screwdriver, then remove the Andy plate.
4.Remove the soft light bar.Replace new and install it in reverse order.
/2*2ZKLWH/('FKDQJH
1.Open the upper rear maintenance door with the key and unplug two connecting
terminals.
2.Loosen two screws with the screwdriver and remove the soft light bar fixing assembly,
then remove two soft light bars.Replace new and install it in reverse order.
/2*25*%/('FKDQJH
3DUW5HSODFHPHQW