12
more. The camera will perform an auto calibration cycle, indicating
“calibrating”, ensuring the most accurate thermal measurement.
[3] Cancel/Clear key (Marked “C”)
•
Pressing and releasing the
C
key cancels the present operation when in
M
enu
mode.
•
Pressing and releasing the
C
key when an image is frozen will return to
real-time measurement status.
•
When a parameter is selected, such as a measurement cursor, pressing
the
C
key will delete the highlighted measurement.
[4] Freeze/Save key (Marked “S”)
Used for freezing a thermal image for on screen analysis. Press the key
once to freeze the image. Press
C
key to return to real time measurement.
The save function is only available on 50 Series Inspectors.
[5] Menu/Confirm key (bar)
Includes
Up
,
Down
,
Left
,
Right
and
Menu/Confirm
(center) keys.
Function varies with operation mode.
In
Menu mode
, it is used for menu selection.
Up
and
Down
keys are
for same level menu operation.
Left
and
Right
keys are for additional levels
of menu operation.
Confirm
key (center) is to activate the menu and
confirm the choice.
In
Image mode
, press
Up
or
Down
key to activate X2 digital zoom.
The screen will display “X2” in the upper left corner. Press
Up
or
Down
key
to return to the original image.
In
Spot Measurement
editing mode (activated immediately after
adding a spot or by selecting via the
A
key), press the
Menu
key to display
the attribute box. Press four navigation keys to move the spot location.
