11
[1] Power key
Press and hold the Power Key for > 3 seconds to power on/off the camera.
! Note
: After powering off, please wait ten seconds before powering the
camera on again.
[2] Select/Auto key (Marked “A”)
The “A” or attribute button performs 2 functions.
a) The first function is modification of selected functions. It is obtained
by a quick press and release (less than 2 seconds), that will select
enabled functions to modify their parameters. Subsequent presses will
“scroll” through the available functions. The selected function will be
highlighted in yellow. The functions include:
•
Measurement Cursors
Cursors - pressing the arrow keys will move their position. Pressing the
Menu key will display the attribute box. Pressing the
C
key will delete the
selected parameter.
•
Color Palette
Pressing the left or right arrows will scroll through the available color
palettes, displaying their name above the palette. The selected palette
will become active after about 3 seconds of selecting it and will be set as
the default power on palette.
•
Level/Span values
Pressing the left or right arrow will reduce or increase the Span and
pressing the up or down arrow will increase or reduce the Level. If the
unit is in Automatic mode, modifying any of these parameters will select
Manual mode.
b) The second function performed is to force an internal calibration
cycle.
This is performed by pressing and holding the
A
key for 5
seconds or