Configuration in the WBM 75
852-1322/852-1328 Industrial Managed Switch
Manual
1.0.01
7.7.2
Reset to Default
When the switch is not working properly, the user can reset it back to the original
factory default setting by clicking on the
[Reset]
button as shown in Figure “WBM
“Maintenance” Page – “Reset to Default” Tab”. When the switch is restarted, the
web browser will be re-directed to the login web page as depicted in Figure
“Login Web Page”. Note that there is no physical reset button on the front panel
of the box; therefore, the user will have to either using the
[Reset]
button on this
page.
Figure 48: WBM “Maintenance” Page – “Reset to Default” Tab
Figure 49: Login Web Page
