58 Configuration in the WBM
852-1322/852-1328 Industrial Managed Switch
Manual
1.0.01
The users can view existing SNMP V3 users’ setting on the list at the upper part
of SNMP V3 Auth. Setting as shown in Figure “WBM “Diagnostics” Page –
“SNMP Tab”, SNMP V3 Auth.”. The list provides information about user Name,
Authentication type, and Data Encryption. The user have an option to remove
existing SNMP V3 user by clicking on the
[Remove]
button in the last column of
each entry.
To add a new SNMP V3 user, the user have to select the user Name from the
dropdown list which can be either Admin or User. Then, the authentication
password with a maximum length of 31 characters must be entered in the Auth.
Password field and re-entered again in the Confirmed Password field. Note that if
no password is provided, there will be no authentication for SNMP V3. Finally,
the encryption key with a maximum length of 31 characters can be entered in the
Encryption Key field and re-entered again in Confirmed Key field. After filling all
the required fields, please click on
[Add]
button to update the information on the
industrial managed switch. Table “WBM “Diagnostics” Page – “SNMP” Tab,
SNMP V3 Auth.” lists the descriptions of SNMP V3 settings.
Table 27: WBM “Diagnostics” Page – “SNMP” Tab, SNMP V3 Auth.
Parameters
Factory Default Description
Name
admin
Choose from one of the following options:
•
Admin
: Administration level (default)
•
User
: Normal user level
Auth.
(Authentication)
Password
wago0852
Set an authentication password for the user name specified
above. If the field is left blank, there will be no authentication.
Note that the authentication password is based on MD5 and
the maximum length of the password is 31 characters.
Confirmed
Password
wago0852
Re-entering the Authentication Password to confirm.
Encryption Key wago0852
Set an encryption key for more secure protection of SNMP
communication. Note that the encryption algorithm is based on
DES and the maximum length of the key is 31 characters.
Confirmed Key wago0852
Re-entering the Encryption Key to confirm.
