WAGO 787-1216, Manual

Page: 12 / 42

0787-1216 Properties
12 Product manual | Version: 1.0.0
Compact Power Supply
3 Properties
3.1 Introduction
The power supply units of the WAGO Power Supplies Compact Series are compact
switched-mode power supplies with a wide range of uses. Their stepped design makes
them suitable for applications, such as for use as a DIN rail built-in installation device in
accordance with DIN 43880, and this is also supported by conformity with EN 60335-1.
The power supply units can be fitted on a DIN rail. Screw mounting using the fastening
clips supplied with the product is also a possible alternative. In this way, products can be
fitted both in the control cabinet as well as in a distribution box or screwed onto the hous-
ing of an automation device.
The products employ WAGO's picoMAX
®
Pluggable Connectors, allowing for pre-wiring
for quicker installation and faster product replacement.
An LED indicates the status of the output voltage (see Section
8
Indicators [
}
14] ).
3.2 View
g
h
i
f
e
d
c
b
a
Figure 1: View
Table 2: Legend for Figure “View”
Position Explanation For Details, See Section
a Screw mount clip 8 Screw Mount [ } 26] .
b picoMAX
®
5.0 input (L N PE)
8
Connections [
}
13] .
c picoMAX
®
5.0 output (+ + − −) 8 Connections [ } 13] .
d Potentiometer for setting the output voltage
8
Control Elements – Introduction [
}
15] .
e LED indicator
8
Indicators [
}
14] .
f Front side ---
g Type Plate
8
Type Plate [
}
13]