0787-1216
Connection
30
Product manual | Version: 1.0.0
Compact Power Supply
2. Insert the unlocking tool fully.
The wedge on the unlocking tool opens the locking tab and the lock is release (see
also the “Removing the Female Connector with Wiring” figure).
3. Grip underneath the protruding rim of the female connector (2).
4. Pull out the female connector.
If you do not have an unlocking tool available, you can also remove the female connector
with a WAGO operating tool or a screwdriver.
WARNING
Do not insert a tool into the ventilation slots!
Components inside the device may be damaged if the blade of an operating tool enters
the ventilation slots. This may lead to serious damage with a risk of injury caused by mal-
function, overheating or electric shock!
•
When using a screwdriver or an operating tool, ensure correct positioning between
the locking latch and the female connector!
Proceed as follows:
1. Use the screwdriver or operating tool to push the locking tab (1) away from the fe-
male connector.
2. Grip underneath the protruding rim of the female connector (2).
3. Pull out the female connector.
Removing the Female Connector with Wiring
Proceed as follows to remove the female connector with the unlocking tool:
1. Place the unlocking tool (3) onto the locking latch (1).
2. Insert the unlocking tool fully.
The wedge on the unlocking tool opens the locking tab and the lock is released.
3. Pull on the unlocking tool together with the conductors to remove the female connec-
tor.
If you do not have an unlocking tool available, you can also remove the female connector
with a WAGO operating tool or a screwdriver.
WARNING
Do not insert a tool into the ventilation slots!
Components inside the device may be damaged if the blade of an operating tool enters
the ventilation slots. This may lead to serious damage with a risk of injury caused by mal-
function, overheating or electric shock!
•
When using a screwdriver or an operating tool, ensure correct positioning between
the locking latch and the female connector!
