Compact Power
Connect Devices 35
787-1200 Power supply
Manual
Version 1.0.0
5
Connect Devices
Do not work when devices are energized!
High voltage can cause electric shock or burns.
Switch off all power to the device prior to performing any installation, repair or
maintenance work.
Ensure a standard connection!
To minimize any hazardous situations resulting in personal injury or to avoid
failures in your system, the data and power supply lines shall be installed
according to standards, with careful attention given to ensuring the correct
terminal assignment. Always adhere to the EMC directives applicable to your
application.
Additional Information on the Recommended Tools
Additional information on the WAGO tools recommended in this section is
provided in the section “Accessories” > “Tools”.
Observe the maximum admissible conductor cross sections for the signal and
power cables (see section “Device Description” > “Technical Data”).
Check the appropriate operating voltage before connecting equipment (see type
plate).
Observe the maximum admissible conductor cross sections for the signal and
power cables (see Section “Device Description” > “Technical Data”).
Check the appropriate operating voltage before connecting the equipment (see
type plate).
