Compact Power
Important Notes 11
787-1200 Power supply
Manual
Version 1.0.0
2.2
Safety Advice (Precautions)
For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:
Do not work when devices are energized!
High voltage can cause electric shock or burns.
Switch off all power to the device prior to performing any installation, repair or
maintenance work.
Live parts are likely to be touched!
The party setting up the device is responsible for providing appropriate touch
guards. The installation regulations must be observed for each individual
application.
Only install this device in closed electrical service locations!
Only install this device in closed electrical areas per EN 50178!
Ensure a standard connection!
To minimize any hazardous situations resulting in personal injury or to avoid
failures in your system, the data and power supply lines shall be installed
according to standards, with careful attention given to ensuring the correct
terminal assignment. Always adhere to the EMC directives applicable to your
application.
Do not touch hot surfaces!
The surface of the housing can become hot during operation. If the device was
operated at high ambient temperatures, allow it to cool off before touching it.
Only for electrical specialists!
The device described must only be installed by qualified electrical specialists acc.
to EN 50110-1/-2 and IEC 60364.
