WAGO 762-5/8000-000 Series, Manual

Page: 87 / 202

Touch Panel Advanced Line Commissioning 87
762-5xxx/8000-000x TP 600
Manual
Version 1.3.0
</dg_
8.5.3.7 “TCP/IP Configuration” Page
The TCP/IP settings for the ETHERNET interfaces are shown on the “TCP/IP
configuration” page.
8.5.3.7.1 “IP Configuration (Xn)” Group(s)
If the switch is enabled, one group (“IP Configuration”) is shown for both
connections.
If the switch is disabled, a separate group (“IP Configuration X1” / “IP
Configuration X2”) is shown for each connection.
Table 47: WBM “TCP/IP Configuration” Page – “IP Configuration (Xn)” Group(s)
Parameters Explanation
Configuration Type
Select a static or dynamic IP address.
Static IP
Static IP addressing
DHCP Dynamic IP addressing
BootP Dynamic IP addressing
IP Address
Enter here a static IP address. This is enabled if
“Static IP” is enabled in the Configuration Type
field.
Subnet Mask
Enter the subnet mask. This is enabled if “Static IP”
is enabled in the Configuration Type field.
Click [Submit] to apply changes. The changes are effective immediately.