WAGO 762-5/8000-000 Series, Manual

Page: 100 / 202

100 Commissioning Touch Panel Advanced Line
762-5xxx/8000-000x TP 600
Manual
Version 1.3.0
8.5.3.12 “Configuration of User Filter” Page
8.5.3.12.1 “User Filter” Group
Table 61: WBM “Configuration of User Filter” Page – “User Filter” Group
Parameters Explanation
Count The number of configured user filters is displayed.
8.5.3.12.2 “User Filter n” Group
Table 62: WBM “Configuration of User Filter” Page – “User Filter n” Group
Parameters Explanation
Source IP address
The source IP address for the respective filter entry
is displayed.
Source netmask
This displays the source network for the
corresponding filter entry.
Source port
The source port number for the respective filter entry
is displayed.
Destination IP address
The destination IP address for the respective filter
entry is displayed.
Destination subnet mask
The destination network mask for the respective
filter entry is displayed.
Destination port
The designation port number for the respective filter
entry is displayed.
Protocol
The permitted protocols for the respective filter is
displayed.
Input interface
The permitted interfaces for the respective filter are
displayed.
Policy
This displays whether the network device is allowed
or excluded by the filter.
Click the appropriate [Delete] button to remove a configured filter. The change is
effective immediately.