WAGO 762-5/8000-000 Series, Manual

Page: 128 / 202

128 Commissioning Touch Panel Advanced Line
762-5xxx/8000-000x TP 600
Manual
Version 1.3.0
8.5.3.32.3 “Settings” Group
The parameters indicated depend on the cloud platform setting and, if applicable,
on other settings in this group.
Table 96: WBM “Configuration of Cloud Connectivity” Page – “Settings” Group
Parameter Explanation
Service enabled
You can enable/disable the cloud connectivity
function here.
Cloud platform Select the cloud platform here.
Hostname
Enter the host name or IP address for the selected
cloud platform here.
Group ID
Here you can specify the group in which the edge
node ID should be placed.
Device ID
Enter the device ID for the selected cloud platform
here.
Client ID
Enter the client ID for the selected cloud platform
here.
Edge Node ID
Enter the edge node ID for the selected cloud
platform here.
Activation Key
Enter the activation key for the selected cloud
platform here.
Clean Session
Here you can specify whether clean session should
be enabled during the connection to the cloud
service. If clean session is enabled, the information
and messages on this connection are not stored
persistently on the cloud service.
TLS
Here you can specify whether TLS encryption
should be used for the connection to the cloud
platform.
Amazon Web Services (AWS) always uses TLS.
Port
Enter the port here to which a connection is to be
established.
Typical values are 8883 for encrypted connections
and 1883 for unencrypted connections.
CA file
Enter the path here to the file encoded in PEM
format that contains the trusted CA certificate to use
to establish an encrypted connection. The default
value is the CA certificate /etc/ssl/certs/ca-
certificates.crt, which is already installed on the
PFC.
User
Enter the user name for cloud service authentication
here.
Password
Enter the password for cloud service authentication
here.
Certification file
Enter the path here to the file encoded in PEM
format that is used for cloud service authentication.