WAGO 751-9301 Manual Download Page 18

Page: 18 / 198

18 Important Notes

WAGO I/O System Compact

751-9301 Compact Controller 100

Manual

Version 1.1.0, valid from FW Version 03.08.07(20)

Avoid electrostatic discharge!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge when touched. Please observe the safety precautions

against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the

devices, please ensure that environmental factors (personnel, work space and

packaging) are properly grounded.

Do not use in telecommunication circuits!

Only use devices equipped with ETHERNET or RJ-45 connectors in LANs.

Never connect these devices with telecommunication networks.

Summary of Contents for 751-9301







































































































































































































Search results

Summary of Contents for 751-9301

Reviews:

Related manuals for 751-9301

Brands by name

Popular brands

WAGO 751-9301, Manual

Search results

Summary of Contents for 751-9301

Reviews:

Related manuals for 751-9301

Brands by name

Popular brands