WAGO 751-9301, Manual

Page: 29 / 198

WAGO I/O System Compact Properties 29
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
Table 8: Digital outputs – “X5”
Contact Signal Description
1 U
in
+ Supply voltage input (DO1 … DO4)
2 0V Ground
3 DO1 Digital output 1
4 0V Ground
5 DO2 Digital output 2
6 0V Ground
7 DO3 Digital output 3
8 0V Ground
9 DO4 Digital output 4
10 0V Ground
4.1.3.5 Analog inputs and outputs
The connectors are for connecting actuators and sensors.
picoMAX ®
plugs with push-in CAGE CLAMP
®
S connections are used.
4.1.3.5.1 Analog inputs
The controller processes signals with standardized values of 0 … +10 V from the
field range.
The product has 2 input channels for field signals.
The sensors are connected to AI1 and ground or AI2 and ground in each case.
The ground connections are available for both channels on a common 0V ground
potential.
The input signal is transmitted at a resolution of 16 bits.
The internal power supply powers the module.
Table 9: Analog inputs – “X14”
Contact Signal Description
1 AI1 Analog input 1
2 GND Ground
3 AI2 Analog input 2
4 GND Ground