WAGO 751-9301 Manual Download Page 186

Page: 186 / 198

186 Appendix

WAGO I/O System Compact

751-9301 Compact Controller 100

Manual

Version 1.1.0, valid from FW Version 03.08.07(20)

Table 119: WBM “Configuration of User Filter” Page – “User Filter” Group

Parameters

Meaning

Protocol

Enter here the protocols for the new filter.
TCP/

UDP

The TCP service and UDP service are

filtered.

TCP

The TCP service is filtered.

UDP

The UDP service is filtered.

Input interface

Enter here the interfaces for the new filter.
Any

All interfaces are filtered.

Bridge

<n>

The interfaces assigned for bridge <n> are

filtered. Only the configured bridges are

displayed.

VPN

The VPN interface is filtered.

Click

[Add]

to apply the new filter. The change takes effect immediately.

Click the

[Delete]

button to delete an existing filter. The change takes effect

immediately.

Summary of Contents for 751-9301







































































































































































































Search results

Summary of Contents for 751-9301

Reviews:

Related manuals for 751-9301

Brands by name

Popular brands

WAGO 751-9301, Manual

Search results

Summary of Contents for 751-9301

Reviews:

Related manuals for 751-9301

Brands by name

Popular brands