WAGO I/O SYSTEM 750 XTR
Run-time System CODESYS 2.3 247
750-8202/040-000 PFC200 2ETH RS XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
10. You can select a module in the new “Module selection” window that then
appears.
Figure 62: “Module Selection” Window
11. You can change the position of an I/O module by marking it and then using
the arrow buttons at the right edge of the window to move it up or down.
Figure 63: I/O Configurator with Defined I/O Modules
12. Use
[Import configuration from file]
to add a configuration imported
previously using WAGO-I/O-
CHECK
.
