WAGO 750-8202/040-000 Manual Download Page 166

Page: 166 / 418

166 Commissioning

WAGO I/O SYSTEM 750 XTR

750-8202/040-000 PFC200 2ETH RS XTR

Manual

Version 1.2.0, valid from FW Version 03.01.07(13)

</dg_

7.8.1.28 “TFTP Server” Page

The settings for the TFTP service are shown on the “TFTP Server” page.

7.8.1.28.1 “TFTP Server” Group

Table 100: WBM “TFTP Server” Page – “TFTP Server” Group

Parameter

Explanation

Service active

Activate or deactivate the TFTP server.

Download directory

Specify here the path for downloading the server

directory.

Click on

[Submit]

to accept the changes. The changes will be effective

immediately.

Summary of Contents for 750-8202/040-000



































































































































































































































































































































































































































Search results

Summary of Contents for 750-8202/040-000

Reviews:

Brands by name

Popular brands

WAGO 750-8202/040-000, Manual

Search results

Summary of Contents for 750-8202/040-000

Reviews:

Brands by name

Popular brands