manualshive.com logo in svg

WAGO 750-8202/040-000, Manual

Share
Download
WAGO 750-8202/040-000 Manual Download Page 211

WAGO I/O SYSTEM 750 XTR 

Commissioning  211 

750-8202/040-000 PFC200 2ETH RS XTR 

 

 

 

Manual 

 

Version 1.2.0, valid from FW Version 03.01.07(13) 

7.8.1.47.2 “Firmware Backup” > “Auto Update Feature” Submenu 

This submenu contains a setting option for the Auto Update function. 

The submenu only appears if the data for the firmware backup has been 

selected. 

Table 168: “Package Server” > “Firmware Backup” > “Auto Update Feature” Menu 

Menu Item 

Explanation 

0. Back to … 

Back to the higher-level menu 

1. No 

The Auto Update function is OFF for the selected 

data. 

2. Yes 

The Auto Update function is ON for the selected 

data. 

 

To make a selection, choose the appropriate menu item. 

To return to the higher-level menu, press 

[Q]

. 

You are taken to the following submenu after making the selection. 

7.8.1.47.3 “Firmware Backup” > “Destination” Submenu 

This submenu contains a selection option for the backup destination drive. 

Table 169: “Package Server” > “Firmware Backup” > “Auto Update Feature” Menu 

Menu Item 

Explanation 

0. Back to … 

Back to the higher-level menu 

1. SD Card 

The selected data is copied to the memory card. 

 

To make a selection, choose the appropriate menu item. 

To return to the higher-level menu, press 

[Q]

. 

The copy progress is displayed during the backup process. 

 

 

Summary of Contents for 750-8202/040-000



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands