2789-9023
Configuration
Product manual | Version: 1.0.0
63
EtherNet/IP Communication Module
• Green: function or state OK
• Red: function or state faulty/tripped
A history of the last error and warning messages can be viewed on the
Logging
page:
Figure 29: Device Measurement > Logging
9.1.8 Configuration of Communication with Broker
The communication between the communication module and a broker can be configured
via the WBM (Web-Based-Management) under
Module Settings
>
MQTT
(see
8
). Establishing the MQTT connection requires the broker to support
the same protocol version as the communication module.
Establishing an Unencrypted Connection
1. In the
Broker Settings
>
IP Address
area, set the IP address of the broker.
Figure 30: IP Address of the Broker
2. In the
Client Settings
area, the preconfigured settings can be adjusted to the use
case:
