WAGNER ZR26-I, Operating Manual, Page: 2 / 38

Table of Contents
1. Preface 3
2. Security advice 5
3. Product description 6
3.1. Use 6
3.2. Mode of operation 6
4. Chaser holders 8
4.1. Tasks 8
4.2. Labelling 8
5. Chasers 9
5.1. Tasks 9
5.2. Design of the chasers 9
5.3. Polished section of the chaser 11
6. Equipment 15
6.1. The fixture 15
6.2. The setting device 15
7. Setting of the chasers in the chaser holder 16
7.1. Determination of the setting value 16
7.2. Holder tables 19
7.3. Insertion and setting of the chasers 21
8. Installation of the chaser holders 22
9. Presetting of the thread diameter 23
10. Mounting of the cutting head onto the machine 24
11. Operation sequence of the thread holders 25
12. Control paths 26
13. Thread cutting and diameter fine adjustment 28
14. Cutting speed 29
14.1. Choice of the cutting speed 29
14.2. Calculation 29
14.3. Choice of the infeed 29
15. The coolant 30
16. Maintenance 31
16.1. Disassembling 31
16.2. Mounting 31
16.3. Verifying of the mode of operation 32
16.4. Exploded assembly drawing ZR 26-I 33
16.5. Spare parts list of WAGNER® Cutting Head ZR 26-I 34
17. Defects and causes thereof 36
2 Operating Manual ZR 26-I