background image

40

VM 5000 

OPERATING MANUAL

EDITION 08/2014

ORDER NUMBER DOC2318718

7.7.1 

PARAMETER OVERVIEW OF LEVEL 1 FOR USERS

Parameter

Value

Description

C11 External release 

(remote)

off  (factory setting) The device functions as a standalone device. External release 

by interface does not have to be defi ned. The bypass is 
activated.

on

If parameter C11 is set, the LED "External release" on the 
control unit lights up continuously.
The external release by interface must be issued. If the trigger 
is pulled despite the fact that no release has been issued, the 
LED display "External release" starts to fl ash quickly.
Release is present when input is connected to GND.

C12 External 

set value 
specifi cation

off  (factory setting) The set values for high-voltage in kV and current limitation 

in μA are set at the operating panel.

on

The set values for high-voltage in kV and current limitation 
in μA are predefi ned using the interface's two analog power 
inputs.
Application example: Set value specifi cation by 
superordinate control (PLC)

Set values can no longer be adjusted at the front control 
panel. All recipe functions (save, call up recipe, etc.) are 
locked.

C13 Lock

off  (factory setting) Lock is deactivated.

on

Lock is activated, set values (kV and μA) cannot be changed, 
user can only select recipes and control functions.

pro

Lock pro (program)
You can select recipes and control functions.
The target values (kV and μA) can be adjusted but cannot be 
saved in the recipes.

7.7 

DEVICE CONFIGURATION

Overview of the device confi guraton levels:

There are 3 levels:

Level 1:

for operator

Level 2:

for WAGNER Service

Level 3:

for WAGNER production plant

Summary of Contents for VM 5000





































































Reviews: