WAGNER VM 5000, Operating Manual, Page: 55 / 68

55
VM 5000
EXT
100
80
60
40
20
μA
80
60
40
20
10
kV
R3
R1
R2
VM 5000
B_03682
_22
12
14 15
OPERATING MANUAL
EDITION 08/2014 ORDER NUMBER DOC2318718
Code
display
Fault Cause Remedy
E11 Ground monitoring - Grounding cable is interrupted - Check/replace gun cable
- Check/replace gun
- Gun is not connected - Connect gun
E12 No coil current/
cascade interrupt - Gun is not connected - Connect gun
- Gun cable is interrupted - Check/replace gun cable
- Cascade in gun is interrupted
defective
- Check/replace gun
E13 Coil current too big - Cascade of the connected gun is
defective
- Check/replace gun
E21-E29 Exception error - Hardware defect has occurred - If problem persists, contact the
WAGNER Service Team
E30 Cabinet door
monitoring - In Aquacoat operation: switching
on the high-voltage with an
open door
- Close Aquacoat cabinet door
E40-E43 Gun communication
faulty
- Gun cable defective - Check/replace gun cable
- Operating unit of spray gun
defective
- Wagner Service
- Control unit defective - Wagner Service
E60 Password error - Password not set - Password to be set by Service
Center
The fault LED (12) indicates faults. In addition, the error number is shown in the 7-segment
display (15). If a fault occurs, the high voltage is immediately switched off . The user can
only continue to work once the fault has been remedied and acknowledged with push
button for service (14).