37
TempSpray-H326 / -H226 / -H126/ -H426
GB
descrIptIon of unIt
3.6
TecHNicaL DaTa TeMPSPray-H126
Voltage :
230 Volt ~, 50 - 60 Hz
Fuses :
16 A
Unit connecting line :
4 m long, 3x1.5 mm²
:
Max. current consumption :
2.6 A
Degree of protection :
IP 54
Max. heating output :
0.6 kW
Max. operating pressure :
25 MPa (250 bar)
Hose :
DN6-10m-steel reinforced
Inner diameter :
6 mm
Length :
10 m
Fitting :
1/4” NPSM
screw connection to the
device
1/4” NPSM
Max. viscosity of the
coating material :
5,000 mPas
Adjustable temperature range: 20°C - 60°C
Dead weight :
3.2 kg
Performance :
Max. nozzle size :
(Continuous operation
with water)
0.011”;
more than 50°C -> 0.009”
Max. nozzle size :
(Continuous operation
with emulsion paint)
0.015”;
more than 50°C -> 0.013”
* based on surrounding and material temperature of 20°C.
During intervallic operation (gun opened/closed) bigger noz-
zles can be used.
3.7
TecHNicaL DaTa TeMPSPray-H426
Voltage :
230 Volt ~, 50 - 60 Hz
Fuses :
16 A
Unit connecting line :
4 m long, 3x1.5 mm²
:
Max. current consumption :
5.9 A
Degree of protection :
IP 54
Max. heating output :
1.3 kW
Max. operating pressure :
25 MPa (250 bar)
Hose :
DN19-15m-steel reinforced
Inner diameter :
19 mm
Length :
15 m
Fitting :
3/4” NPSM
screw connection to the
device
3/8” NPSM
Max. viscosity of the
coating material :
40,000mPas
Adjustable temperature range: 20°C - 60°C
Dead weight :
19 kg
Performance :
Max. nozzle size :
(Continuous operation
with spray putty)
0,052”
* With this maximum nozzle size, a temperature setting of
60°C and an ambient temperature of 7°C, the emerging mate-
rial has a processing temperature of 25°C.
