WAGNER SUPER FINISH 23 CR, Operating Manual

Page: 33 / 120

33
Super Finish 23 CR
EN
STARTUP
2. Screw the high pressure hose (9) onto the hose connec-
tion or the pressure gauge.
3. Screw the gun (10) or the material ball cock onto the high
pressure hose.
4. Tighten all union nuts on high pressure hose so that no
material can escape.
When unscrewing the high pressure hose,
hold firmly on the hose connection with a
22mm wrench.
4.3
HOPPER
1. Ensure that the sealing surfaces of the connections are
clean. Ensure that the red inlet (1) is inserted in the coat-
ing material inlet (4).
2. Screw the union nut (5) on the return pipe (6) onto the
connection (7) (spanner width 22mm).
3. Screw the upper hopper (8) onto the coating material in-
let (4).
1
4
5
6
7
8
9
10
4.4
SUCTION SYSTEM
1. Ensure that the sealing surfaces of the connections are
clean. Ensure that the red inlet (1) is inserted in the coa-
ting material inlet (4).
2. Use the enclosed 41 mm wrench to screw the union nut
(2) at the suction hose (3) onto the coating material inlet
(4) and tighten it.
3. Screw the union nut (5) at the return hose (6) to the con-
nection (7) (22mm).
11
4
12
6
7
5
1