WAGNER SUPER FINISH 23 CR, Operating Manual

Page: 25 / 120

25
Super Finish 23 CR
Translation of the original operating instructions
EN
CONTENTS
Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 26
2 SAFETY REGULATIONS FOR AIRLESS SPRAYING 27
2.1 Flash point _________________________________ 27
2.2 Explosion protection _________________________ 27
2.3 Danger of explosion and fire from sources of
ignition during spraying work _________________ 27
2.4 Danger of injury from the spray jet _____________ 28
2.5 Secure spray gun against unintended operation __ 28
2.6 Recoil of spray gun __________________________ 28
2.7 Breathing equipment as protection against
solvent vapors ______________________________ 28
2.8 Prevention of occupational illnesses ____________ 28
2.9 Max. operating pressure ______________________ 28
2.10 High-pressure hose _________________________ 28
2.11 Electrostatic charging
(formation of sparks or flames) ________________ 28
2.12 Use of units on building sites and workshops _____ 29
2.13 Ventilation when spraying in rooms ____________ 29
2.14 Suction installations _________________________ 29
2.15 Earthing of the object ________________________ 29
2.16 Cleaning the unit with solvents ________________ 29
2.17 Cleaning the unit ___________________________ 29
2.18 Work or repairs at the electrical equipment ______ 29
2.19 Work at electrical components _________________ 29
2.20 Setup on an uneven surface ___________________ 29
3 GENERAL VIEW OF APPLICATION ____________ 29
3.1 Application ________________________________ 29
3.2
Coating material ____________________________ 30
3.2.1 Coating materials with sharp-edged additional
materials __________________________________ 30
3.2.2 Filtering (for spay work) ______________________ 30
3.3
Two-position operation ______________________ 30
3.4 Explanatory diagram _________________________ 31
3.5 Technical data ______________________________ 32
4 STARTUP _________________________________ 32
4.1 Gun ______________________________________ 32
4.2
High pressure hose and pressure gauge _________ 32
4.3 Hopper____________________________________ 33
4.4
Suction system _____________________________ 33
4.5 Connection to the mains network ______________ 34
4.6 Cleaning preserving agent when starting-up of
operation initially ___________________________ 34
4.7 Ventilate unit (hydraulic system) if the sound of
inlet valve is not audible ______________________ 34
4.8 Taking the unit into operation with
coating material ____________________________ 34
5 TRANSPORTATION _________________________ 35
6 HANDLING THE HIGH-PRESSURE HOSE _______ 35
7 INTERRUPTION OF WORK ___________________ 35
8 CLEANING THE UNIT _______________________ 36
8.1 Cleaning the unit from the outside _____________ 36
8.2 Suction filter _______________________________ 36
8.3 Cleaning the Airless spray gun _________________ 37
9 SERVICING ________________________________ 37
9.1 General servicing ___________________________ 37
9.2 High-pressure hose __________________________ 37
10 REPAIRS AT THE UNIT ______________________ 38
10.1 Inlet valve Pusher ___________________________ 38
10.2 Inlet valve _________________________________ 38
10.3 Outlet valve ________________________________ 38
10.4 Pressure control valve ________________________ 38
10.5 Typical wear parts ___________________________ 38
10.6 Remedy in case of faults ______________________ 40
11 SPARE PARTS AND ACCESSORIES ____________ 41
11.1 Super Finish 23 CR accessories _________________ 41
11.2 Spare parts list Super Finish 23 CR _____________ 44
11.3 Spare parts List Trolley _______________________ 45
11.4 Spare parts list hopper 5l _____________________ 45
Testing of the unit ________________________________ 46
Important information on product liability_____________ 46
Note on disposal __________________________________ 46
Guarantee declaration _____________________________ 46
CE - declaration___________________________________ 46
European service network _________________________ 120