WAGNER PROTEC 2K, Translation Of The Original Operating Manual

Page: 66 / 132

66
PROTEC 2K
OPERATING MANUAL
VERSION 02/2016 ORDER NUMBER DOC2352824
8
CLEANING AND MAINTENANCE
Cleaning work should be undertaken regularly and carefully by qualifi ed and trained staff .
They should be informed of specifi c hazards during their training.
The following hazards may arise during cleaning work:
- Health hazard from inhaling solvent vapors
- Use of unsuitable cleaning tools and aids
8.1
CLEANING
8.1.2
SAFETY INSTRUCTIONS
8.1.1
CLEANING STAFF
Clean the piston pumps only with a damp cloth.
Observe safety instructions in Chapter 4.
DANGER
Incorrect maintenance/repair!
Danger to life and equipment damage.
Only a WAGNER service center or a suitably trained person may
carry out repairs and replace parts.
Only repair and replace parts that are listed in the "Spare parts"
chapter and that are assigned to the unit.
Before all work on the device and in the event of work interruptions:
- Relieve pressure from spray guns and devices.
- Secure spray guns against actuation.
- Switch off the energy/compressed air supply.
- Disconnect the control unit from the mains.
Observe the operating and service manual for all work.
8.1.3
CLEAN PRODUCT TANK
Ensure, that the product tanks not become electrostatically charged:
- Use only a damp cloth or a damp brush for cleaning.
- Remove external contamination by hardener or master batch.