WAGNER PROTEC 2K, Translation Of The Original Operating Manual

Page: 58 / 132

58
PROTEC 2K
OPERATING MANUAL
VERSION 02/2016 ORDER NUMBER DOC2352824
7.5.1
CONTINUING AFTER WORK INTERRUPTION
1. Visual check: personal safety equipment, grounding and all devices ready to use.
Blue handle (3) at bottom. Red handle (12) at top. All circulation and return hoses are
secured and lead into the product tanks A or B.
2. Check levels A and B.
If fl ushing pump present:
A. Check level of fl ushing agent.
B. Adjust suitable fl ushing pressure at the air pressure regulator of the fl ushing pump (31).
C. Open the air ball balve of the fl ushing pump (32).
If heater is present:
E. Insert the power plug of the heaters.
3. After long work interruptions: Circulate working material in accordance with Chapter 7.4.2.
4. Start spraying mode: Turn down red handle (12).
5. Slowly open 2K air ball valve (2).
6. Release the spray gun and spray. Optimize the spray jet and spraying results.
7. Restart work process. At all times:
Monitor the level of the product tank.
Monitor pot life .
Monitor the pressure gauges A and B and ensure that the product pressures A
and B always remain consistently high (see Chapter 7.4.3.1).
End spraying
8. Close and secure the spray gun.
Next steps :
- Intermediate fl ushing in accordance with Chapter 7.6, or
- circulate in accordance with Chapter 7.4.2. Note pot life!
7.6
INTERMEDIATE FLUSHING
As soon as possible after work and before the pot life expires, the mixed product must be
removed from the system by means of intermediate fl ushing.
Hardened working material in the spraying system when 2K product is processed!
Destruction of pump and injection system.
Follow the manufacturer‘s processing rules, particularly regarding the pot life.
Perform intermediate fl ushing before end of pot life.
The pot life is decreased by warmth.
NOTICE