WAGNER PROTEC 2K, Translation Of The Original Operating Manual

Page: 55 / 132

55
PROTEC 2K
OPERATING MANUAL
VERSION 02/2016 ORDER NUMBER DOC2352824
B_05298
1
2
B_05425
!
!
!
P
A
= P
B
Blue handle (circulation) off . Monitor: Pot life, level, pressure A +
B the same.
Red handle (spray) on.
2K spraying
5
6
Fill spray gun hoses with 2K product
14. Start spraying mode: Turn down red handle (12).
15. Close 2K air pressure regulator (1) (0 MPa; 0 bar; 0 psi).
16. Point the spray gun without nozzle toward the grounded collecting tray and pull off .
17. Slowly open 2K air ball valve (2).
18. Slowly turn the air pressure up on the 2K air pressure regulator (1) and only until the
pump is running normally (approx. 0–0.05 MPa; 0–0.5 bar; 0–7.25 psi). Be ready to
switch from working material to air (or fl ushing agent) and prevent back spray.
19. As soon as clean working material fl ows, close and secure the spray gun.
20. Insert nozzle in gun and start work process.
Spraying
We recommend two people for spraying mode:
One person operates the spray gun.
A second person operates and monitors the system.
21. Set the required working pressure on the 2K air pressure regulator (1).
22. Unlock spray gun and spray until the spray jet is good. Set spraying pressure on 2K air
ball valve (2).
23. Optimize the spraying results as laid down in the gun instructions.
24. Start the work process. At all times:
Monitor the
level
of the product tank.
Monitor
pot life
.
Monitor the
pressure gauges A and B
and ensure that the product pressures A
and B always remain consistently high (see Chapter 7.4.3.1).
End spraying
25. Close and secure the spray gun.
Next steps
:
- Intermediate fl ushing in accordance with Chapter 7.6, or
- circulate in accordance with Chapter 7.4.2. Note pot life!
7.4.3
2K SPRAYING