78
ProfiTech M
OPERATING MANUAL
VERSION 07/2014
ORDER NUMBER DOC 2335144
7.15
CONNECTION OF THE MOTION TECHNIQUE
A maximum of 4 VU1 reciprocators and 4 HU1 sliding tables can be connected to a
Profi Tech M system.
A supply voltage of 230 VAC 50/60 Hz and 24 VDC is needed for the operation of the
inverter / position encoder.
To supply 230 VAC, two supply groups are provided.
They can be connected to terminal X30.
The load must always be evenly divided between the two groups.
Group 1 = line protection F3 A
Group 2 = line protection F3 B
The CAN signal for the motion technique is to be connected to the "Move" connection on
CAN 2, together with the converter, one after the other.
An M12 plug and an M12 coupling, for the transmission, are available on each converter.
The CAN bus termination must be set on the last inverter!
The SFM2 module (protection door module) can be inserted in the supply cable as an
option.
Summary of Contents for ProfiTech M
