WAGNER ProfiTech M, Original Operating Manual

Page: 86 / 108

86
ProfiTech M
OPERATING MANUAL
VERSION 07/2014 ORDER NUMBER DOC 2335144
7.17
COMMISSIONING
Before commissioning, the entire electrical installation and the correct electrical connection
of all components are to be checked and released by an electrician.
Take enough time to carry out the individual steps calmly and carefully.
Read the entire operating manual carefully.
1. Switch on the main switch on the booth cabinet or distributor cabinet and check if
energy is correctly transferred to the other users.
2. Switch on external main switch (supply line to the CPS I/O Cabinet)
3. Switch on the MCM.
The operating system is loaded and the home screen appears after approx.
15 seconds.
4. Ensure that the motion component's traveling distance is clear and that no persons
are working on the device.
5. Switch on key switch.
6. Log in to the system parameters with authorization.
7. Check if the indicator lights on the motion devices and control units for the gun
make indications correctly.
8. Call up the parameters menu on the MCM.
8. With the help of Installation Wizard, carry out all steps in the order in which they are
displayed.
10. Load a coating recipe.
11. Test the system function in manual mode.
12. Carry out coating in manual mode with the help of test work pieces (In order to to
this, the conveyor must be ready for operation.) and check the correct function of
the components.
13. Create new recipes with optimized settings for optimal coating results.
Copying an existing recipe into a new recipe and then changing the parameters is
recommended.
To optimize using the correction menu, you can temporarily change values, test the
coating results and fi nally save the recipe editor using the "Applied" function.