Safety regulations
08/2008
0241891
– PI-P1 / PI-F1
5
1. Safety
regulations
Warning
This equipment can be dangerous if it is not operated in accordance with this
operating manual!
There might be additional regulations to be observed, put into effect by
governmental, state or other official agencies or local security (fire)
departments!
The following rules must be observed in order to ensure a safe and efficient use of the equip-
ment:
•
The user has to make sure, that the average
powder/air concentration does not exceed 50%
of the LEL (maximum allowed concentration of
powder in air). If a reliable LEL value is not avail-
able, the average powder/air concentration may
not exceed 10 g/m³.
•
Over sprayed powder must be reliably collected.
•
Adhere to the instructions given by the manufac-
turers and to the prevalent local laws on the
environment when disposing of waste coating
powder.
•
Specially trained personnel may only carry out
repairs. Repairs must never be performed in an
explosion-hazard area.
•
Guideline 94/9/EG:
The device is suited for the
applications it was designed for, even in
explosion-hazard areas.
General safety rules
•
Wear suitable work clothing
•
Use breathing protection or a vizard for work
which produces powder and when
developing solvent steams:
Avoid health dangers by inhalation and skin
contacts of solvent steams and lacquer
aerosols; Cornea injuries by splashes in the eye.
Warning
For your own safety, use only accessories and equipment listed in the operating
manual. The use of individual parts other than those recommended in the
operating manual may create a hazard to personal safety.
Use only original Wagner replacement parts!
Alteration or repair of Wagner original spare parts may cause fatal accidents or
explosions in the coating system!
