WAGNER GA 5000EACEC, Operating Manual

Page: 31 / 108

31
GA 5000EAC
B_00020
"?
OPERATING MANUAL
VERSION 09/2016 ORDER NUMBER DOC2360922
AirCoat air
Multi-channel swirl nozzle
Spray jet
Nozzle nut
Spray product
AirCoat air
Advantages
- Large application volume
- Low fogging tendency
- Good fi nish
- High viscosity products can easily be applied
- High endurance of the nozzles
- Jet width adjustment
5.6.2
SPRAYING PROCEDURE FOR AIRCOAT FLAT JET
Shaping air
Air cap
Variable spray jet width
Atomizing air
Advantages
- Large application volume
- Low fogging tendency
- Good fi nish
- High viscosity products can easily be applied
- High endurance of the nozzles
- Jet width adjustment
In the AirCoat process, the spray product is atomized under a pressure of 3-15 MPa; 30-150 bar; 435-2176 psi.
With the help of an air pressure of 0-0.25 MPa; 0-2.5 bar; 0-36 psi, a soft, spray jet is produced. The spray jet
diameter can be adjusted by turning the nozzle nut.
5.6.1
SPRAYING PROCEDURE FOR AIRCOAT ROUND JET
In the AirCoat process, the spray product is atomized under a pressure of 3-15 MPa;
30-150 bar; 435-2176 psi With the help of the AirCoat air, with a pressure of 0-0.25 MPa;
0-2.5 bar; 0-36 psi, a soft, fl at spray jet is produced which largely eliminates the problem of
overlapping in the peripheral zones. With shaping air, there is the possibility of reducing
the width of the spray jet.