WAGNER GA 5000EACEC Operating Manual Download Page 39

Page: 39 / 108

GA 5000EAC

OPERATING MANUAL

VERSION 09/2016

ORDER NUMBER DOC2360922

6.4.5

AIR SUPPLY

6.4.6

PRODUCT SUPPLY

The use of an air fi lter with air regulator ensures that only dry, clean atomizing air gets into
the spray gun. Dirt and moisture in the atomizing air worsens the spraying quality and
spray pattern.

Impurities in the spraying system!

Spray gun blockage, products harden in the spraying system.

Flush the spray gun and paint supply with a suitable fl ushing agent.

NOTICE

Bursting hose, bursting threaded joints!

Danger to life from injection of product.

Ensure that the hose material is chemically resistant to the

sprayed products.

Ensure that the spray gun, threaded joints and product hose

between the device and the spray gun are suitable for the
pressure generated in the device.

Ensure that the following information can be seen on the high-

pressure hose:

Manufacturer

- Permissible operating pressure

- Date of manufacture.

DANGER

Hose connections!

Risk of injury and damage to the device.

Do not exchange hose connections of product hose and air hose.

WARNING

Summary of Contents for GA 5000EACEC













































































































Search results

Summary of Contents for GA 5000EACEC

Reviews:

Related manuals for GA 5000EACEC

Brands by name

Popular brands

WAGNER GA 5000EACEC, Operating Manual

Search results

Summary of Contents for GA 5000EACEC

Reviews:

Related manuals for GA 5000EACEC

Brands by name

Popular brands