FineCoat 7000 S
17
GB
Apply a fine coat of silicone-free oil to the marked areas.
12.
If the paint spray gun is not used for any length of time, it
13.
should be cleaned and protected by applying a fine coat
of silicone-free oil.
Changing the nozzle
Note: Make sure that the air cap, the tip and the needle have
identical markings.
Remove the adjusting ring, the air cap and the spring plate
1.
(fig. 13).
Fig. 14 – Loosen the needle seal with the open-end
2.
wrench (1). Remove the material adjusting knob (2) and
the pressure spring (3). Open trigger of the spray gun to
facilitate needle removal (4).
2
3
4
1
Remove the needle (5) (fig. 15).
3.
5
Remove the tip with the enclosed special socket wrench
4.
(fig. 16).
Reassemble with the new nozzle set in reverse order.
Attention: The needle seal screw connection must be read-
justed after reassembly.
