8
Evobell 3500
OPERATING MANUAL
EDITION 05/2010
PART NO. DOC387841
2.2.1
SAFE HANDLING OF WAGNER SPRAY UNITS
2.2.2
MATERIAL HOSES
2.2.3
CLEANING
4HESPRAYJETISUNDERPRESSUREANDCANCAUSEDANGEROUSINJURIES
!VOIDINJECTIONOFPAINTORCLEANINGAGENTS
.EVERPOINTTHEHIGHROTATIONATOMIZERATPEOPLE
.EVERREACHINTOTHESPRAYJET
"EFOREALLWORKONTHEUNITANDINTHEEVENTOFWORKINTERRUPTIONS
n3ECURETHEHIGHROTATIONATOMIZERAGAINSTACTUATION
n2ELIEVETHEPRESSUREFROMTHEHIGHROTATIONATOMIZERANDUNIT
)NTHEEVENTOFSKININJURIESCAUSEDBYPAINTORCLEANINGAGENTS
.OTEDOWNTHEPAINTORCLEANINGAGENTTHATYOUHAVEBEENUSING
#ONSULTADOCTORIMMEDIATELY
Ensure that the hose material is chemically resistant to the sprayed materials.
Ensure that the material hose is suitable for the pressure generated in the unit.
Ensure that the material hose is not conductive.
Ensure that the material hose has a sufficiently high disruptive strength or that is
additionally isolated to earth.
De-energize the unit electrically.
Disconnect the pneumatic supply line.
Relieve the pressure from the unit.
Non-flammable cleaning agents should preferably be used.
Flammable cleaning liquids may only be used if, after switching off the high voltage
supply, all high voltage conducting parts are discharged to a discharge energy of less
than 0.24 mJ before they can be accessed.
Ensure that the flash point of the cleaning agent is at least 5 K above the ambient
temperature.
To clean, use only solvent-free cloths and brushes. Never use hard objects or spray on
cleaning agents a gun.
An explosive gas/air mixture forms in closed containers.
When cleaning units with solvents, never spray into a closed container.
Earth the container. Only use electrically conductive containers.