Waeco Switch200VTO, Installation And Operating Manual

Page: 24 / 168

Setting the control box PerfectView SWITCH200VTO
EN
24
7 Setting the control box
Switch200VTO must be adapted to certain connection options. Use a dip switch
(fig.
5 6, page 5) to do this.
The dip switch is designed for setting the mirror function and for switching the connected
cameras between long-distance and close-up, provided this function is supported by the
selected cameras: dip switch 1 and 3 set camera 1, dip switch 2 and 4 set camera 2.
➤
Set the dip switches according to the following table:
8 Warranty
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please send the following items:

Defect components
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
9 Disposal
➤
Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre or
specialist dealer for details about how to do this in accordance with the appli-
cable disposal regulations.
DIP switch Camera 1 DIP switch Camera 2
1 3 Function 2 4 Function
OFF OFF Mirrored OFF OFF Mirrored
ON OFF Normal/close-up ON OFF Normal/close-up
OFF ON Long-distance OFF ON Long-distance