Waeco Switch200VTO, Installation And Operating Manual, Page: 21 / 168

PerfectView SWITCH200VTO Technical description
EN
21
5.1 Connections
The control box has the following connections:
No. in
fig. 5 , page 5
Connection description
1 Red cable: connection to 12 V to 34 V positive (e.g. connected posi-
tive terminal, terminal 15)
2 Black cable: connection to earth (terminal 31)
3 Green control cable (+ signal) for connecting the positive cable of the
reversing light
When you shift into reverse gear, the control box is activated via this
cable.
4 Yellow control cable (+ signal, video trigger out) with AMP Quadlok
plug contact for controlling the camera activation signal of lorry multi-
media systems
When the camera input is active, this signal has a level of +7.5 V.
When the camera input is switched off, it is switched to earth.
5 Connection of the rocker switch supplied for switching between the
two camera inputs manually.
6 Dip switch for mirroring the camera image manually and for switching
between long-distance and close-up manually (provided the camera
supports this function)
7 Camera input 1
8 Camera input 2 with trailer detection
9 Potentiometer for adjusting the delay between the video signal and
video trigger signal (0.8 s to approx. 3 s)
10 Audio output for connecting to audio inputs using a cinch connector
11 Video output (cinch socket) for connecting…

diverse multimedia navigation systems and lorry monitors in
combination with the corresponding adapter
 another monitor with a video input (cinch socket) or a video
recorder.