Waeco PerfectView M70IP, Installation And Operating Manual

Page: 38 / 280

Using the LCD monitor PerfectView M70IP
EN
38
8 Using the LCD monitor
8.1 Switching on the monitor
➤
With the monitor switched off, press the “
P
” button on the monitor (fig.
0
7, page 6)
or the “
P
” button on the remote control (fig.
a
3, page 7) to switch on the monitor.
✓
The picture appears.
8.2 Switching off the monitor
➤
Press the “
P
” button on the monitor (fig.
0
7, page 6) or the “
P
” button on the remote
control (fig.
a
3, page 7) to switch off the monitor.
✓
The picture disappears.
8.3 Setting the language (fig.
0
, page 6)
The default language is English.
To set the language, proceed as follows:
➤
Press the “M” button ( 3 ) twice to open the “Options” menu.
✓
The “Lang” parameter is displayed at the top in the menu.
➤
Use the “–” ( 5 ) and “+” ( 6 ) buttons to select the desired language:
English/Deutsch/Français/Español/Português/Italiano/Nederlands/X
✓
The display indicates the desired language.