Waeco PerfectView CRT300, Installation And Operating Manual, Page: 40 / 200

40
Delivery scope
No. Quantity Designation
1 1 Monitor-kit RV-52 (see
.
C)
1.1 1 Monitor
1.2 1 Anti-glare visor
1.3 1 Monitor holder
1.4 1 Connection cable harness
1.5 1 Distance scale
2 1 Camera kit RV-23
2.1 1 Camera
2.2 1 Camera holder
2.3 1 Camera protection cover
2.4 1 Extension cable 20 m
2.5 1 Insulation plate
2.6 4 Insulation sleeve
Tools required
The following tools are required for installation and assembly:
– Scale (see
.
B 1) – Dril (see
.
B 5)
– Centre punch (see
.
B 2) – Screwdriver (see
.
B 6)
– Hammer (see
.
B 3) – Spanner / wrench (see
.
B 7)
– Bits (see
.
B 4)
The following tools are required for the electrical connection
and testing:
– Diode test lamp (see
.
B 8) – Thermal shrinking hose
or voltmeter (see
.
B 9) – Hot-air dryer (see
.
B 12)
– Crimping pliers (see
.
B 10) – Soldering bi (see
.
B 13)
– Insulation tape – Tin-lead solder (see
.
B 14)
You may need other screws, nuts, washers, tapping screws and
binders for fastening the camera and monitor than those contained in the
delivery scope depending upon the individual installation.