ColdMachine
Using the cooling unit
47
7.2
Start the cooling unit
Devices without TEC control
➤
Switch in the cooling unit by turning the control button clockwise
(fig.
1
A1 or B1, page 3).
If you turn the control button further, you can regulate the temperature. De-
vices with energy storage function offer a storage activation button
(fig.
1
A2, page 3).
I
Note
If the red LED flashed or glows, a fault has occurred and the system
cannot be operated (see error table in Chapter chapter “LED on the
thermal element (fig.
1
2, page 3)” on page 50).
Devices with TEC control
Devices with TEC control are started by actuating the main switch
(fig.
2
6, page 3). You can then regulate the temperature (fig.
2
5, page 3)
with the temperature selector.
7.3
Shutting down the cooling unit
If you do not intend to use the cooling device for a prolonged period,
proceed as follows:
➤
Devices without TEC control
: Turn the control to 0.
➤
Devices with TEC control
: Switch off the device with the main switch
(fig.
2
6, page 3).
➤
Disconnect the power cable from the battery or pull the DC cable plug
out of the rectifier.
➤
Clean the cooling device.
➤
Leave the door slightly open over the cover.
This prevents odour build-up.
_coldmachine.book Seite 47 Mittwoch, 30. April 2008 3:26 15
“More information https://www.caravansplus.com.au"
