Using the cooling unit
ColdMachine
46
Connecting to a 230 V mains supply
e
Danger of fatal injuries!
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
e
Caution!
If you are operating your cooling device on board a boat with
a mains connection of 230 V from the land, you must install
a residual current circuit breaker between the 230 V mains
supply and the cooling device.
Seek advice from a trained technician.
➤
To operate the cooling unit from the 230 V mains, use the WAECO
rectifier
– EPS-100W for devices with Bd-35F compressor (50/80/CS series),
– MPS-35 for devices with Bd-35F compressor (50/80/CS series),
– MPS-50 for devices with Bd-50F compressor (90 series).
I
Note
The output voltage of the described rectifier is 24 V. Please
remember this when connecting other consumers at a later time.
7
Using the cooling unit
7.1
Energy saving tips
z
Choose a well ventilated installation location which is protected from
direct sunlight.
z
Allow hot food to cool down first before placing it in the device.
z
Do not open the refrigerated container more often than necessary.
z
Do not leave the door open for longer than necessary.
z
Defrost the refrigerated container once a layer of ice forms.
z
Avoid unnecessary low temperatures.
z
Clean the condenser of dust and dirt at regular intervals.
z
Clean the lid seal regularly.
_coldmachine.book Seite 46 Mittwoch, 30. April 2008 3:26 15
“More information https://www.caravansplus.com.au"
