Wacom nextbeat X-1000, User Manual, Page: 20 / 44

9
3 Basic Operation
3.1 Switching Channels
Controls Used
The nextbeat has 2 channels: A and B.
You can do the following in the selected channel:
Play, pause, use cues, use the centre pad, monitor the
channel in the headphones, use the loop and sampler
functions.
3.1.1 Channel Switching and the
LEDs
To switch to channel A
Press .
To switch to channel B
Press .
When you switch channels, the working buttons
and LEDs change to the colour for that channel
(orange for channel A and green for channel B).
Depending on the operation mode, the settings,
the circumstances of your performance and how
the nextbeat is adjusted, some LEDs and buttons
may not light up.
When channel A is selected
When channel B is selected
3.1.2 Adjusting the Headphone
Sound
Adjusting the balance
This adjusts the balance between the selected
CUE sound (the selected channel (A or B)) and
the master sound.
Selected CUE
sound : 100% Master
sound : 100%
Selected CUE sound : Master sound
50% : 50%
Adjusting the volume
■
■