wc_tx004580en.fm
28
Operation
LTS
4
Operation
4.1
Preparing the Machine for First Use
1. Make sure all loose packaging materials have been removed from the machine.
2. Check the machine and its components for damage. If there is visible damage,
do not operate the machine. Contact your Wacker Neuson dealer immediately
for assistance.
3. Take inventory of all items included with the machine and verify that all loose
components and fasteners are accounted for.
4. Attach component parts not already attached.
5. Add fluids as needed and applicable, including fuel, engine oil, and battery acid.
6. Move the machine to its operating location.
4.2
Positioning the Machine
DANGER
Asphyxiation hazard. Exhaust gas from the machine contains carbon monoxide, a
deadly poison you cannot see or smell. Exposure to carbon monoxide can kill you
in minutes.
►
Position the machine so that exhaust will not enter any nearby structures.
WARNING
Fire hazard. Do not move the machine while it is running.
►
Shut down the machine before moving or repositioning it.
WARNING
Electric shock hazard. The tower extends up to 7 m (23 ft) and could contact
overhead wires or obstructions.
►
Position the trailer on a firm, flat surface clear of overhead wires and
obstructions.
WARNING
Fire hazard. Machines positioned on a hill or an incline may slide, break away or
roll over.
►
Do not position the machine on a hill or an incline.
WARNING
Explosion and fire hazard. Risk of severe injury or death.
►
Do not operate the machine near flammable vapors, fuels, or combustibles.
Summary of Contents for LTS4K
