Wacker Neuson GPS9700A, Operator'S Manual

Page: 40 / 200

Maintenance GPS9700A
40
wc_tx004602en.fm
5 Maintenance
5.1 Maintaining the Emission Control System
For machines sold in North America:
Normal maintenance, replacement, or repair of emission control devices and
systems may be performed by any repair establishment or individual; however,
warranty repairs must be performed by a dealer/service center authorized by
Wacker Neuson. The use of service parts that are not equivalent in performance
and durability to authorized parts may impair the effectiveness of the emission
control system and may have a bearing on the outcome of a warranty claim.
5.2 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks

may be performed by the operator. Tasks designated with square bullet
points  require special training and equipment.
* Service more frequently in dusty conditions
5.3 Engine Oil Viscosity
Daily
before
starting
First
month
or
20 hrs
Every
6 months
or
100 hrs
Every
year
or
300 hrs
Every
2 years
or
500 hrs
Check fuel level. 
Check engine oil level.

Inspect fuel lines. 
Inspect air filter. Clean as needed.*

Check external hardware. 
Change engine oil.*
 
Check shockmounts. Replace as needed.

Check and clean spark plug.

Check fuel filter.

Replace oil filter.*
 
Replace spark plug.

Check and adjust valve clearances.*

Replace fuel filter.*

Replace air cleaner (paper element only).*

Check fuel line. Replace as needed.
