wc_si001095en.fm
15
GPS9700A
Safety Information
If connected to a building’s electrical system, the generator must meet the power,
voltage, and frequency requirements of the equipment in the building. Differences
in power, voltage, and frequency requirements may exist and improper connection
may lead to equipment damage, fire, and personal injury or death.
Transporting
and installing
the machine
Never allow untrained personnel to operate or service the generator. The
generator set should be set up by a certified electrician.
Do not stand under the machine while it is being hoisted or moved.
Do not attach equipment to the machine when it is suspended.
Always transport the generator in an upright position.
Always position and operate the generator on a firm, noncombustible, level
surface.
Always make certain the machine is well-grounded and securely fastened to a
good earthen ground per national and local regulations.
Always remove all tools, cords, and other loose items from the generator before
starting it.
General safety
Do not operate the generator when open containers of fuel, paint, or other
flammable liquids are near.
Do not operate the generator, or tools attached to the generator, with wet hands.
Do not operate near open windows, tents, or structural air intakes.
Do not run the electrical cords under the generator, or over vibrating or hot
parts.
Do not enclose or cover the generator when it is in use or when it is hot.
Do not overload the generator. The total amperage of the tools and equipment
attached to the generator must not exceed the load rating of the generator.
Do not operate the machine in snow, rain, or standing water.
Do not stand on the machine.
Generator
vibration
Generators vibrate in normal use. During and after the use of the generator,
inspect the generator as well as extension cords and power supply cords
connected to it for damage from vibration.
Have damaged items repaired or replaced as necessary.
Do not use plugs or or cords that show signs of damage such as broken or
cracked insulation or damaged blades.
=
After use
Store the machine properly when it is not being used. The machine should be
stored in a clean, dry location out of the reach of children.
Cleaning
When cleaning and servicing the machine:
Keep machine clean and free of debris such as leaves, paper, cartons, etc.
Keep labels legible.
Clean with soapy water only.
When cleaning the machine:
Do not clean the machine while it is running.
Never use gasoline or other types of fuels or flammable solvents to clean the
machine. Fumes from fuels and solvents can become explosive.
Summary of Contents for GPS9700A
