background image

Safety information

GH 3500

10

 

Personal protective gear

Wear personal protective gear to avoid injuries or health hazards:

„

Non-skid, hard-toed shoes.

„

Work gloves made of durable material.

„

Overalls made of durable material.

„

Hardhat.

„

Ear protection.

 

Ear protection

This machine generates noise that exceeds the country-specific permissible 
noise levels (individual rating level). This is why ear protection is required in Ger-
many starting at 89 dB(A) in accordance with BGV B3.

  

3.3

Transport

Switching off the machine

Before you transport the machine, it must be switched off, and the engine must 
be given sufficient time to cool down.

 

Emptying the tank

We recommend that the fuel tank be emptied and the carburetor run dry prior to 
transporting it. Fuel could run out, e.g. if the machine is tilted.

 

Lifting

When lifting the machine, observe the following instructions:

„

Designate a skilled person to guide you for the lifting procedure.

„

You must be able to see or hear this person.

„

Use only suitable and certified hoisting gear, lifting tackle and load-bearing 
equipment with sufficient lifting capacities.

„

Only use the attachment points described in the operator's manual.

„

Attach the machine securely to the hoisting gear.

„

Ensure that no one is nearby prior to lifting the machine.

„

Do not climb onto the machine.

„

Make sure that no one walks under or stands beneath the suspended ma-
chine.

 

Summary of Contents for GH 3500



































Reviews: